-40%
6 ft Long K-Type Thermocouple Digital Thermometer Probe Fiber Glass PK-400-2m
$ 7.91
- Description
- Size Guide
Description
K-Type Thermocouple for Digital Thermometers PK-400 100"-320 to 752°F (-200 to 400°C) - Extra Long 6ft / 72 inch/ 200 cm wire
This is a reliable thermocouple wire with a K-Type sensor. The k type Thermocouple sensor is at the tip of a 6 ft extra long wire probe, which has a medium temperature fiberglass insulation, good up to 752 degree Fahrenheit or 400 degree Celsius.
The fiberglass is secured with thin thermocouple wire, not with a plastic shrink tube (which could melt at the high temperature).
The thermocouple has a miniature type connector (2 flat blades) that will work with digital K-type thermometers of many manufacturers (Nicety, Fluke, Extech, Omega). This thermocouple probe can be used to measure air or gas temperature, non corrosive liquids and the sensor can be attached to pipes or embedded into objects you want to measure.
This thermocouple will read very low temperatures, if you have a suitable thermometer. I have tested this down to -350°F (-210°C) with my thermometer DT1311 and DT1312. The k-type thermocouple thermometers DT804 and DT804A only measure to -58°F. The miniature K-type thermocouple connector can easily be opened and you can shorten the wire if desired.
Specification:
Thermocouple: K-Type ( chromel / alumel )
Temperature Range:
-320 to 753°F (-200 to 400°C)
Wire length: approx. 6 ft / 72 inch / 200 cm
Probe Diameter: 0.06 inch (1.6mm)
Miniature K-Type connector, can be opened if you want to shorten wire
Powered by
eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.